<?xml version="1.0" encoding="UTF-8"?>



<records>

  <record>
    <language>eng</language>
          <publisher>Oriental Scientific Publishing Company</publisher>
        <journalTitle>Biosciences Biotechnology Research Asia</journalTitle>
          <issn>0973-1245</issn>
            <publicationDate>2016-06-20</publicationDate>
    
        <volume>12</volume>
        <issue>Spl.Edn.2</issue>

 
    <startPage>239</startPage>
    <endPage>245</endPage>

	 
      <doi>10.13005/bbra/2196</doi>
        <publisherRecordId>12891</publisherRecordId>
    <documentType>article</documentType>
    <title language="eng">Polymer Composite Materials for Semiconductor Optoelectronics and Microelectronics</title>

    <authors>
	 


      <author>
       <name>Alexander A. Ivanov</name>

 
		
	<affiliationId>1</affiliationId>
      </author>
    

	

	

	


	


	
    </authors>
    
	    <affiliationsList>
	    
		
		<affiliationName affiliationId="1">National Research Tomsk State University</affiliationName>
    

		
		
		
		
		
	  </affiliationsList>






    <abstract language="eng">New alumosilicate filled with aluminum oxyhydroxide (AlO(OH)) is offered as
a dielectric substrate (DS) for LED devices. Obtained from these substances the DS have
high thermal conductivity up to l = 133.61 W/m×K, whose value depends on the amount
of AlO(OH) in the DS. High thermal conductivity is achieved by homogeneous distribution
of a large number of AlO(OH) nanosize particles in the crowns of the dendrimer
alumosilicate ensembles. The size of the AlO(OH) particles is comparable to that of the
voids between the branches in the alumosilicate crowns. As a conductive adhesive for
fixing of LED chips on the DS the copolymer of vinyl chloride-maleic anhydride, nanoand
microparticles of silver (70 wt. %) composite is offered, the volume resistivity of the
wirings being up to 3.1·10-8 Ohm×m. Adhesive strength of the filled alumosilicate (80% of
AlO(OH)) applied under shear on the aluminum plate (its roughness to be 11.3 mkm) is
47 N/mm2.</abstract>

    <fullTextUrl format="html">https://www.biotech-asia.org/vol12_nospl_edn2/polymer-composite-materials-for-semiconductor-optoelectronics-and-microelectronics/</fullTextUrl>



      <keywords language="eng">
        <keyword>Composite materials; nanostructures; intermolecular interactions; supramolecular structures; sol-gel products; macromolecular conformations; dielectric composition; conductive polymer composition; LED bar</keyword>
      </keywords>

  </record>
</records>